You Are Here：Home > Information dynamic
> Industry Trends
News Navigation
Can moisture proof green environmental friendly particleboard be used for a long time
source：www.1398899.net Time：2024-12-24
Moisture resistant green and environmentally friendly particleboard can be used for a long time under certain conditions, but this is influenced by various factors:
1.Material Characteristics and Process Fundamentals
Moisture resistance: Compared to ordinary particleboard, this type of particleboard has undergone moisture resistance treatment, often by using special adhesives, adding waterproofing agents, or applying waterproof film to the surface of the board to resist certain moisture erosion. For example, particleboard with hydrophobic substances such as paraffin added makes it difficult for water to penetrate the internal structure in large quantities, reducing problems such as bulging, deformation, and mold caused by moisture, laying the foundation for long-term use.
Environmental protection attribute guarantee: Green environmental protection means that during the production process, the free formaldehyde release of the adhesive is relatively low, which meets national environmental standards. For example, particleboard that reaches E1 level or even higher has minimal impact on indoor air quality. Users do not have to worry about long-term exposure to harmful gas environments, which is also conducive to maintaining the stability of the board itself and avoiding structural damage caused by adhesive aging and decomposition.
2.Environmental factors for use
Indoor environment: If moisture-proof green and environmentally friendly particleboard is applied indoors under normal temperature and humidity conditions (temperature 20-25 ℃, relative humidity 40% -60%), away from water sources, and placed in dry areas such as living rooms and bedrooms, it can maintain good condition for decades. For example, indoor wardrobes and bookshelves can be stably supported by particleboard as long as they are not frequently splashed or soaked in water, maintaining their appearance and functionality.
Special environment: However, if it is in a high humidity environment, such as a bathroom or kitchen where water vapor permeates, even with moisture-proof design, over time, water vapor will gradually break through the protection, corrode the board, and reduce its service life; Similarly, in unprotected outdoor environments, particleboard is prone to fading, cracking, and delamination due to exposure to sunlight, rain, and large temperature differences, making it difficult to use for a long time.
3.Installation and maintenance status
Correct installation: It is crucial to follow the specifications during installation. If the plates are subjected to uneven stress, have excessive gaps, or are forcibly joined during the installation process, it will cause internal stress concentration and deformation over time. For example, if the particle board of the cabinet is not aligned accurately during installation, the opening and closing of the cabinet door may be affected during subsequent use, and the entire cabinet structure may become loose in the long run.
Regular maintenance: Daily cleaning and maintenance of furniture or facilities using particleboard also determine their usage duration. Regularly wiping dust to prevent stains from adhering for a long time, and occasionally nourishing the surface with mild maintenance agents, can make the appearance of the wood shavings last as new, delaying the aging and damage process.
Overall, in a suitable indoor environment, with proper installation and maintenance, moisture-proof green and environmentally friendly particleboard can serve for a long time, meeting the needs of 10-20 years or even longer.
1.Material Characteristics and Process Fundamentals
Moisture resistance: Compared to ordinary particleboard, this type of particleboard has undergone moisture resistance treatment, often by using special adhesives, adding waterproofing agents, or applying waterproof film to the surface of the board to resist certain moisture erosion. For example, particleboard with hydrophobic substances such as paraffin added makes it difficult for water to penetrate the internal structure in large quantities, reducing problems such as bulging, deformation, and mold caused by moisture, laying the foundation for long-term use.
Environmental protection attribute guarantee: Green environmental protection means that during the production process, the free formaldehyde release of the adhesive is relatively low, which meets national environmental standards. For example, particleboard that reaches E1 level or even higher has minimal impact on indoor air quality. Users do not have to worry about long-term exposure to harmful gas environments, which is also conducive to maintaining the stability of the board itself and avoiding structural damage caused by adhesive aging and decomposition.
2.Environmental factors for use
Indoor environment: If moisture-proof green and environmentally friendly particleboard is applied indoors under normal temperature and humidity conditions (temperature 20-25 ℃, relative humidity 40% -60%), away from water sources, and placed in dry areas such as living rooms and bedrooms, it can maintain good condition for decades. For example, indoor wardrobes and bookshelves can be stably supported by particleboard as long as they are not frequently splashed or soaked in water, maintaining their appearance and functionality.
Special environment: However, if it is in a high humidity environment, such as a bathroom or kitchen where water vapor permeates, even with moisture-proof design, over time, water vapor will gradually break through the protection, corrode the board, and reduce its service life; Similarly, in unprotected outdoor environments, particleboard is prone to fading, cracking, and delamination due to exposure to sunlight, rain, and large temperature differences, making it difficult to use for a long time.
3.Installation and maintenance status
Correct installation: It is crucial to follow the specifications during installation. If the plates are subjected to uneven stress, have excessive gaps, or are forcibly joined during the installation process, it will cause internal stress concentration and deformation over time. For example, if the particle board of the cabinet is not aligned accurately during installation, the opening and closing of the cabinet door may be affected during subsequent use, and the entire cabinet structure may become loose in the long run.
Regular maintenance: Daily cleaning and maintenance of furniture or facilities using particleboard also determine their usage duration. Regularly wiping dust to prevent stains from adhering for a long time, and occasionally nourishing the surface with mild maintenance agents, can make the appearance of the wood shavings last as new, delaying the aging and damage process.
Overall, in a suitable indoor environment, with proper installation and maintenance, moisture-proof green and environmentally friendly particleboard can serve for a long time, meeting the needs of 10-20 years or even longer.
Previous：
What factors affect the quality of odorless E0 gr…
Next：
What are the characteristics of ENF board is used
Related articles
Related products
Mobile Number：Zhang Zong 13812811801 Xie Zong 15618328869
Marketing Call：0512-52672388
Fax Number：0512-52671910
Company Address：Xushi Nandu Qiaotu, DONGBANG Town, Changshu City, Jiangsu Province
Enterprise wechat
+
wechat number：底部微信
Home
Wechat
Tell